Chief MAC400 Bedienungsanleitung PDF herunterladen

INSTALLATION INSTRUCTIONS

8805-000159 REV. A 10/26/05

CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: [email protected]

MAC-400

MID-SIZE FLAT SCREEN ROTATION ACCESSORY

Prior to assembly, unpack carton completely and verify contents.

If you are missing any of the following components, please contact Customer Service at 1-800/582-6480.

Figure 1

(1) Rotation Assembly (4) Mounting Buttons – Tapped 10-24

(4) 10-24 x .5” Flat Head Cap Screws (1) Locking Strap

(2) ¼-20 x .5” Button Head Cap Screws (2) ¼-20 x .5” Security Button Head Cap Screws

(2) ¼-20 Square Nuts (1) 5/32” Security Hex Key

(1) 1/8” Hex Key

BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY

CAUTION! FLAT SCREEN DISPLAYS ARE EXTREMELY FRAGILE.

NOTE: The MAC-400 adds 0.94”of depth and 6 lbs (2.72 kg) to overall installation. It is the installer’s responsibility to ensure that

combined weight of screen and MAC-400 does not exceed the maximum support weight of the mount.

1. Remove screen from Chief Mount or, if not installed, install MSB interface bracket to back of screen per instruction supplied

with the interface.

2. Attach mounting buttons to Rotation Assembly, using the four 10-24 x 1/2” flat head cap screws. Make sure the buttons are

securely fastened. .

Figure 2

Figure 3

ATTACH

MOUNTING

BUTTONS

HERE

1 2

INSTALLATION INSTRUCTIONS 8805-000159 REV. A 10/26/05 CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: [email protected]

Installation Instructions MAC-400 23. Attach MAC-400 to MSB Interface Bracket by placing the mounting buttons of MSB into the teardrop slots of M

Keine Kommentare

Chief MAC400 Bedienungsanleitung