Chief XSM1U Handbuch PDF herunterladen (Seite 9)

Installation Instructions XSM1U/XTM1U

Attaching Interface Brackets to Screen

1. Align the center of the bracket (V and W or X and Y) with

center of screen. (See Figure 5)

NOTE: The diamond-shape holes in the bracket correspond to

the center of the mount.

Figure 5

WARNING: IMPROPER INSTALLATION CAN LEAD TO

DISPLAY FALLING CAUSING SERIOUS PERSONAL

INJURY OR DAMAGE TO EQUIPMENT! Using screws of

improper size may damage your display. Properly sized

screws will easily and completely thread into display

mounting holes. If spacers are required, be sure to use longer

screws of the same diameter.

2. Select correct screws, nesting spacers (if necessary) and

universal washers from the hardware bag (A-H) and attach

brackets to back of screen. (See Figure 5)

NOTE: The nesting spacers (G) may be used separately, or put

two together in different configurations to create

different size spacers. (See Figure 6)

Figure 6

Switching Interface Brackets (Optional)

If an installation situation makes adjusting the location of

interface brackets necessary, there are several options.

1. The wall brackets may be adjusted side to side at the point

of attachment. (See Figure 7)

2. The location of the left and right interface brackets (V and W

or X and Y) may be switched, with the knobs on the XTM1U

interface brackets (X and Y) facing the inside of the mount.

(See Figure 7)

Figure 7

Center of bracket

[Brackets V and W shown]

(G)

(H)

(A-F)

.391"

.563"

.750"

(Single)

(Nested)

(Stacked)

Knobs

[Brackets X and Y shown]

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Chief XSM1U Handbuch Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Flachbildschirmhalterungen Chief XSM1U