Chief LFAUB Installationshandbuch PDF herunterladen (Seite 10)

LFAU Installation Instructions

Adjustments

Height Adjustment

1. Remove cable cover (G) to expose height adjustment knob.

2. Turn height adjustment knob clockwise to raise display.

(See Figure 13)

3. Turn height adjustment knob counterclockwise to lower

display. (See Figure 13)

WARNING: Do not attempt to raise or lower the adjustment

carriage beyond its upper or lower limit. High and low points

are shown in Figures 13 and 14.

NOTE: A 1/2" socket wrench may also be used to adjust height

by turning bolt just above height adjustment knob.

4. Reinstall cable cover (G) to column assembly.

Figure 13

Figure 14

Pitch Adjustment

5. Turn pitch adjustment knob clockwise to tilt display forward.

(See Figure 15)

6. Turn pitch adjustment knob counterclockwise to tilt display

back. (See Figure 15)

Roll Adjustment

7. Turn roll adjustment knob clockwise to adjust roll to the left.

(See Figure 15)

8. Turn roll adjustment knob counterclockwise to adjust roll to

the right. (See Figure 15)

Figure 15

high point

height adjustment knob

low point

pitch adjustment

knob

roll adjustment

knob

5 6

1 2 ... 5 6 7 8 9 10 11 12

Keine Kommentare

Chief LFAUB Installationshandbuch Seite 10