Chief RSA Series Bedienungsanleitung PDF herunterladen (Seite 11)

Installation Instructions RSA Projector Mounts

Pitch Adjustment

1. Loosen pitch adjustment locking screw on each end

of the RSA projector mount using a #2 Phillips

screwdriver.

2. Adjust projector angle to desired pitch.

3. Tighten pitch adjustment locking screw on each end

of the RSA projector mount using a #2 Phillips

screwdriver.

ADJUSTMENTS

YAW Adjustment

1. Loosen yaw adjustment screw using a 5/32" hex

key.

NOTE: Yaw is only adjustable when attached to a

threaded pipe.

WARNING: Do not turn the projector to the end of

the pipe threads. The projector, interface plate and

projector will fall from the pipe if it is unthreaded too

far! A minimum of four threads must be engaged in

order to ensure a secure connection!

2. Adjust projector by turning the projector on the pipe

to the desired yaw position.

3. Tighten yaw adjustment locking screw using a 5/32"

hex key.

Example Only

(Interface bracket

varies dependent

on projector model)

Example Only

(Interface bracket

varies dependent

on projector model)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Chief RSA Series Bedienungsanleitung Seite 11