Chief KTA220B Installationshandbuch PDF herunterladen (Seite 6)

Models: KTA-220/225 and KTA-320/325 Installation Instructions

Figure 10: Install End Lock(s)

Display Adjustment

These pivot arrays allow horizontal, pitch, roll, and yaw

adjustment of each display with a maximum pitch range

of 15° up and 15° down.

These pivot arrays also allow a full 360 deg. of display

roll.

Display Horizontal Position Adjustment

To adjust display horizontal position:

1. Loosen Centris bracket rear adjustment knob.

(See Figure 11)

2. Slide Centris bracket with display left or right until

properly positioned on array rail.

3. Tighten Centris bracket rear adjustment knob.

Figure 11: Display Horizontal Adjustment

Display Pitch, Roll, and Yaw Adjustment

To adjust display position:

1. Loosen Centris bracket front adjustment knob.

(See Figure 12)

2. Tilt display up or down, or adjust display roll left or

right until properly positioned.

3. Tighten Centris bracket front adjustment knob.

Figure 12: Display Pitch and Roll Adjustment

End Lock

End Lock Retaining Screw

Centris Head

Array Rail

Horizontal

Adjustment

Knob

Pitch/Roll

Adjustment

Knob

1 2 3 4 5 6 7 8

Keine Kommentare

Chief KTA220B Installationshandbuch Seite 6