Chief MAC400 Bedienungsanleitung PDF herunterladen (Seite 2)

Installation Instructions MAC-400

3. Attach MAC-400 to MSB Interface Bracket by placing the mounting buttons of MSB into the teardrop slots of MAC-400. Make

sure the mounting buttons are placed securely in teardrop slots. See Figure 4.

Figure 4

4. Place locking strap over top mounting buttons and secure using two ¼-20 button head cap screws and two ¼-20 square nuts.

Use ¼-20 tamper-proof security screws and 5/32” security hex key (provided) for added security. See Figure 5 and Figure 6.

Figure 5

Figure 6

5. Set desired amount of friction for rotating the screen by tightening or loosening the four nuts on the backside of the

MAC-400. See Figure 7.

Figure 7

6. With the aid of another person, lift Flat Panel Display and MAC-400 up to Chief Mount, aligning buttons of Rotation

Accessory with slots in the Chief Mount.

7. Raise safety latch on Chief Mount to secure Display, making sure latch is completely engaged.

8. If you wish to rotate screen the other way, take screen and Rotation Accessory from Chief Mount, rotate the back plate of the

MAC-400 by 90 degrees.

9. Install screen on Chief Mount.

10. Use holes on outside bends to tie wires for cable management.

11. On some mounts, you may have to increase friction on tilting and/or roll mechanisms since the MAC-400 adds depth to

overall installation.

LOCKING

STRAP

1 2

Keine Kommentare

Chief MAC400 Bedienungsanleitung Seite 2