Chief WP23S Installationshandbuch PDF herunterladen (Seite 8)

WP2XS, WP2XUS Installation Instructions

Steel Studs

IMPORTANT ! : See Site Requirements section before

proceeding with Steel Studs installation to ensure

installation site meets requirements! The drywall must

have a minimum thickness of 1/2"!

1. Determine mounting location on wall. Use stud finder to

locate steel studs.

2. Line up four holes on wall plate (E) with center of studs at

desired mounting location. (See Figure 4)

3. Using wall plate as a template, mark four holes at the four

holes in wall plate. (See Figure 4)

4. Drill four 1/2" holes at marked locations on wall. (See

Figure 4)

Figure 4

5. Hold metal channel on

Toggler® 1/4-20 (BB) Snap-Toggle

(not included) flat alongside plastic straps and slide channel

through hole. (See Figure 5)

Figure 5

6. Holding plastic straps on anchor, pull anchor away from wall

until channel rests flush behind wall making sure anchor

channel is positioned vertically on stud. (See Figure 6)

7. Slide plastic cap on anchor towards wall until flange of cap

is flush with wall. (See Figure 6)

Figure 6

8. Snap off plastic straps on anchor at wall by pushing side to

side, snapping off straps level with flange of plastic cap.

(See Figure 7)

9. Repeat Steps 6 through 8 for each mounting hole.

Figure 7

x 4

(E)

x 4

Drywall

Plastic Straps

anchor x 4

Plastic Cap

Drywall

Anchor Metal Channel

Steel Stud

(side view)

Plastic Straps

Drywall

Anchor Metal Channel

Plastic Cap

Steel Stud

(side view)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Chief WP23S Installationshandbuch Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektorhalterungen Chief WP23S